Inductors - Siemens EH675TK11E Repair Instruction

3.5

Inductors

3.5.1 Characteristics, types and assembly
Type
145 mm 145 mm 145 mm
180 mm 180 mm 180 mm
180 mm 180 mm 180 mm
180x280 mm 180x280 mm 180x280 mm
210 mm 210 mm 210 mm
180 mm 180 mm 180 mm
280 mm 280 mm 280 mm
280 mm 280 mm 280 mm
210 mm 210 mm 210 mm
260 mm 260 mm 260 mm
320 mm 320 mm 320 mm
The 145,180 and 210 mm inductors have been changed, to include
the function of frying and to improve the efficiency, heat distribution
and recipient detection. (Before, there was only frying in the 210mm
inductor).
In the frying models, the 180 and 210 inductors have a second NTC
(3-way connector). In the case of the 145mm inductor it is necessary
to insert into the ELIN a short-circuited 3-way connector (a type of
jumper with its own code).
206_58300000141095_ara_en_k.doc – 04.10.a
name
Bräter
28cm double
Triple 32 cm
(NEW
for IH5-I)
Warning!
When changing the part of the ELIN of the 145mm inductor with frying
function, the jumper of the original part should be taken and installed
in the new ELIN.
If we do not install the jumper, the frying will not operate.
Does not come with spare.
Seite 22 von 113