Siemens EH675TK11E Repair Instruction page 37

3.10.2 Touch Control feed connection
The 4-wire connector between the ELIN and Touch Control is the one
which feeds Touch Control.
206_58300000141095_ara_en_k.doc – 04.10.a
3.10.3 Jumper connector for 15 cm frying sensor
In order for the frying sensor function of this 15 cm inductor to work it
is necessary to connect this jumper; if not, the frying sensor function is
not activated.
For the rest of the inductors with frying it is not necessary, because we
connect the 3-way NTC, which controls the frying and activates the
function.
Seite 37 von 113