Siemens EH675TK11E Repair Instruction page 25

3.5.3 Double, triple or Bräter cooking zones
These zones can recognize recipients of different sizes. Depending
on the material and the properties of the recipient, the zone will
adapt automatically; either only the simple zone or its entirety and
supplying the adequate power to obtain good cooking results.
There is no light indicator indicating how many rings are active.
Even if the external ring is not active, the internal ring can supply
more power than if the external one were active.
Warning!
The double, triple and Bräter (multiples) inductors have
that is, the connection of its elements cannot be inverted.
If this is not taken into account, the detection of the recipient could fail
and if the ring were activated or the auxiliary element the correct
power will not be supplied. For this reason, the cables of the inductor
are of a different colour.
206_58300000141095_ara_en_k.doc – 04.10.a
3.5.4 Booster in multiple inductors
The booster is always possible. A b appears on the display, but the
power depends on the elements which are active.
The detection of the number of active rings is not indicated with any
light signal.
The superbooster can only be activated in the external ring.
For example:
4.6 kW
3.6 kW
polarity
,
inductors on the right disconnected and external ring
active
a right inductor connected and external ring active
Seite 25 von 113