Siemens EH675TK11E Repair Instruction page 30

3.7.1.2 Stickers
If the sticker is not put in place, the liquid inside the recipient can
overflow.
Steps to put the sticker in place:
 On the card with the drawing of the recipient, there is a
cutout part which must be removed.
 Support the sticker from the base of the recipient and with a
pencil we mark a line on the recipient on the cutout part of
the sticker.
 Remove the sticker and stick it from the marked line
upwards.
206_58300000141095_ara_en_k.doc – 04.10.a
3.7.1.3 Appropriate recipients for this function
On curved recipients the sticker does not stick well (bubbles remain).
This function is indicated for straight recipients.
Moreover, for the temperature of the recipient to be measured
properly, the liquid inside must be above the level of the sticker, as
otherwise, the temperature measured is not real and the liquid could
overflow.
Seite 30 von 113