Table of Contents
Advertisement
3.9
Graycode regulator
It can be found behind the TouchControl when operation is performed
using controls.
The Graycodes are fixed to the TouchControl with two screws each.
They are connected via a terminal, which needs to be pulled through
from the rear in order to remove it easily.
206_58300000141095_ara_en_k.doc – 04.10.a
3.9.1
Function and characteristics
It selects the power for the hotplates and the superbooster function.
It has an independent code from the TouchControl. It comes with the
wiring (grey) included.
Regarding the regulator on the conventional vitroceramic tops, it can
be noted that the control is harder.
Seite 35 von 113
Hide quick links:
Advertisement
Table of Contents
