Table of Contents
Advertisement
Upper and lower case characters
Press <#> to toggle between upper and lower case.
TTI1
_
"Upper" means the machine will enter only upper-case letters, similar to the "Caps
Lock" button on your PC.
"Lower" means the machine will enter only lower-case letters.
Entering symbols
You can also enter special characters or symbols.
1
When the machine prompts you to enter a name, press < * >.
The LCD will change to:
2
Select the character you want to enter using the <t>, <u>, <p> or <q> keys.
3
To enter a character, press <Enter>.
4
If you want to enter another character, repeat steps 1 to 3.
Otherwise, go to next step.
5
Press <Enter> to save it.
Editing characters
If you entered an incorrect letter or digit, press <Cancel> to erase the character on the
left.
To edit just one character or digit, press <t> or <u> to move the cursor to that charac-
ter or digit. Then press <Cancel> to erase it. Re-enter the correct character or digit.
Backup memory
User data and auto-dialing settings are automatically backed up in memory.
However, documents stored in memory will be lost after 72 hours if there is a power
failure or if you disconnect the power cord. (See "Specifications," page AI-2.)
;Upper
TTI1
_
/ / / /Enter
;Lower
G
ettInG started
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
2-3
Advertisement
Table of Contents
