G Etting Started - Muratec MFX-1350 User Manual

Level one Level two
function menu function menu
2. User 1. Machine
Settings Settings
2.Fax
Settings
2-6 G
ettInG started
Level three
Description
function menu
07. Primary You can set the primary standby mode.
Mode
08. Service
For technical support. Do not turn this
Mode setting on unless an authorized techni-
cian asks you to do so.
09. Date & Time Sets the current date and time
10. Paper
Selects the paper source for faxing or
Source copying.
11. Page Displays the total number of pages you
have printed and scanned.
Counter
12. Scanner You can specify the sleep period of the
scanner lamp to prolong the life of your
Sleep
machine's scanner lamp.
01. Scan You can set the following settings for fax
Parameters sending.
• Primary fax resolution
• Primary scanning contrast
• Super fine resolution
02. Print You can set the following settings for fax
Parameters reception.
• Reduction rate
• Reduction margin
• Half-page reception*
* For the MFX-1350(with standard
duplex unit)/MFX-1330(with optional
duplex unit), the following menu is
displayed.
• Paper save function
03. # Of Rings Sets the number of rings before your
machine answers.
04. Redial Sets the number of times and dial inter-
val for automatic fax redialing.
05. Dialing
Sets the dialing pause length.
Pause
06. Memory Tx Turns memory transmission on/off.
07. Quick Tx Turns quick memory transmission on/off. Off
08. Select TTI Selects the TTI you want to use.
09. ECM Mode Turns ECM mode on/off.
10. Block Junk Rejects unauthorized incoming faxes.
Fax
Setting Page
Scan 10-3
Copy
Fax
Off 10-3
On
— 10-3
Fax 10-3
Copy
Fax/Copy
Not Used
—
Off 10-4
On
For MFX-1350/F-305
Start time: 19:00
Reset time: 06:30
For MFX-1330/F-300
Start time: 22:00
Reset time: 06:00
10-5
Normal, Fine,
S-Fine, Gray
Lightest, Light,
Normal, Dark,
Darkest
400dpi, 600dpi
10-5
Auto, 100%
40 mm (00-85 mm)
Off, On
Off, H. Page Rx, Duplex
Rx
For MFX-1350/F-305
10-6
02 times (00-10 times)
For MFX-1330/F-300
02 times (01-10 times)
For MFX-1350/F-305 10-6
02 times (00-14 times)
1 min. (0-5 min.)
For MFX-1330/F-300
02 times (02-15 times)
1 min. (1-5 min.)
For MFX-1350/F-305
10-6
02 sec. (00-10 sec.)
For MFX-1330/F-300
02 sec. (02-10 sec.)
Off
On 10-6
On 10-6
TTI Default 4-17
TTI1
TTI2
TTI3
Off
Off 10-6
On
Off
Mode1
Mode2
Mode3
8-8
5-7
5-6
4-3
4-3
5-9