Sending A Fax Using A Department Code; Making A Copy Using A Department Code - Muratec MFX-1350 User Manual

Sending a fax using a department code

For this operation to work, make sure:
• The department code should be set on your machine.
• You know the department code.
1
Place your document on the ADF or document glass.
(See page 2-11 for details.)
2
Adjust the document resolution and contrast.
3
Enter the fax number by either pressing a one-touch key, entering a speed-dial num-
ber or manually dialing it.
4
Press <Start>. (If you pressed a one-touch key, no need to press <Start>.)
Enter Dept. Code
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1350 /MFX-1330.

Making a copy using a department code

For this operation to work, make sure:
• The department code should exist on your machine
• You know the department code
1
Place your document on the ADF or document glass and adjust settings.
2
Use the numeric keys to enter the number of copies.
4
Press <Start>.
Enter Dept.Code
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1350/MFX-1330.
000000000
000000000
s
ecurIty features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
9-11