Fax Settings; Accessing The Fax Settings - Muratec MFX-1350 User Manual

Fax settings

The fax settings allows you to customize various fax settings to match your needs.

Accessing the fax settings

1
Press <Menu>, <2>, <2>.
[Program]
2 Fax Settings
2
Press <Enter>.
[Program]
01 Scan Parameters
3
Use <q> or <p> to search the item you want to set or change and press <Enter>.
4
Change settings and press <Enter>. For details of each setting, refer to the table
below:
5
When you have finished, press <Reset> to return to the standby mode.
The underlined settings are factory defaults.
01 Scan Parameters
02 Print Parameters Rx Reduc. Rate (Refer to the page 5-6.)
No.22_
No.2201
Resolution You can choose one of the following.
Normal
Fine
S-Fine
Gray
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light or Lightest.
S-Fine Resol. You can choose one of the following.
400dpi, 600dpi
Auto
100%
Margin Set the reduction margin for Auto reduction. (00 to 85 mm)
40 mm
Half Page Recpt.*
Off
On
* When the MFX-1350 (with standard duplex unit)/MFX-1330(with
optional duplex unit), the following menu will be displayed.
Paper Save
Off
H.Page Rx Combines two half-page receptions onto a single
Duplex Rx Combines and prints the received two one-sided
Scan at 8 dots/mm × 3.85 lines/mm.
Scan at 8 dots/mm × 7.7 lines/mm.
Scan at 8 dots/mm × 15.4 lines/mm.
Scan at 8 dots/mm × 7.7 lines/mm.
Automatically reduces printouts at variable
rates down to a minimum of 50%. Tries to
reduce printout to fit on one sheet of your
selected paper size. If it can't, print the
received document at 100% size on two or more
pages.
Does not reduce the received documents.
Not combine the half-page receptions.
Combines two of half-page receptions onto a
single sheet.
Will not perform either half-page receptions or
duplex receptions.
sheet.
pages onto both sides of a single sheet.
u 10-5
ser settInGs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A