Set Alert Tones; Rename The Handset; Set The Auto Answer; Select Base - VTech FS6414-A User Manual

6.3.5

Set Alert Tones

A single beep is emitted when you press a key. You can turn on or off the key tone. You
can also turn on the alert tones when low battery and out of range are detected. Low
battery tone will be emitted while you are talking with the phone to alert you that you
need to charge up your battery.
1. Press MENU then
2. Press OK then
3. Press OK then
4. Press OK then
5. Press OK
6.3.6

Rename the Handset

1. Press MENU then
2. Press OK then
3. Press OK then enter the name of your handset.
4. Press OK
6.3.7

Set the AUTO Answer

1. Press MENU then
2. Press OK then
3. Press OK then
4. Press OK
6.3.8

Select Base

This feature applies if you have purchased more than one FS6414A/FS6414-2A/
FS6414-3A cordless phone system, and have registered the handset to more than one
of these base units. You can select the base that you wish the handset to operate with.
1. Press MENU then
2. Press OK then
3. Press OK then
4. Press OK
to select HS SETTINGS.
to select TONE SETUP.
to select KEY TONE, BATTERY TONE or OUT OF RANGE.
to turn on or off these tones.
to select HS SETTINGS.
to select RENAME HS.
to select HS SETTINGS.
to select AUTO ANSWER.
to turn on or off the auto answer feature.
to select HS SETTINGS.
to scroll to SELECT BASE.
to select BASE 1, BASE 2, BASE 3, or BASE 4.
26