Telephone Base And Charger Installation - VTech CS6629-2 User Manual

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, you must install a DSL filter between the telephone line cord and
telephone wall jack. Contact your DSL service provider for more information about
DSL filter.
Electrical outlet
(not controlled
by a wall switch)
Telephone
base power
adapter
Telephone base
• Use only the power adapters supplied with this product. To order a replacement, visit our
website at www.vtechcanada.com or call 1 (800) 267-7377.
• The power adapters are intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
Telephone wall jack
A DSL filter (not
included) is required
if you have DSL
high-speed Internet
service.
The DSL filter must
be plugged into the
telephone wall jack.
Telephone line cord
2
Electrical outlet
(not controlled
by a wall switch)
Charger
adapter
Charger