Key Functions (When Setting Value); Starting Test Mode; Ending Test Mode; Memory Switch - KERN GAB 3K1DM Service Manual

2.1.2 Key Functions (when setting value)

Key
ON
OFF
ZERO
TARE
MODE
Memory
Switch

2.1.3 Starting Test Mode

1. Press and release the ON/OFF key while the TARE
key is depressed.
2. Release the TARE key.

2.1.4 Ending Test Mode

1. C mode / F mode status
2. Release the ON/OFF key after depressing for one
second or more.

2.1.5 Memory Switch

1. C mode / F mode status
2. Press the Memory Switch.
- Use at TEST mode startup.
(Press this key while the TARE key is depressed.)
- Use at TEST mode end
- Use when selecting digits.
- Press when fixing values after mode or data selection.
- Increments values for each press during data change.
- Press when entering C3 or F mode
(Tactile switch in the main circuit board)
Stores EPROM data set for each item of the C and F mode.
Operation
Operation
Operation
- 9 - GAB/GAS-SH-e-0711
Function
Display
Display
Display