Chapter 2 Test Mode; Operation; Test Mode Flow - KERN GAB 3K1DM Service Manual

Chapter 2
The Test Mode is used for diagnosis and/or setting at maintenance service.

2.1 Operation

2.1.1 Test Mode Flow

START
TARE
TARE
TARE
TARE
Note: Press the memory switch at any time during test mode to record the data to the EPROM.
Then "P-EP" appears in the display.
Test Mode
L003 Program No. display
C1 X
Setup of Country No.
C2 XX Setup of Scale No.
And Decimal point
MODE
Span adjustment
C3
MODE
Setting measuring CONDITIONS
F x x x
EPROM clear
ON/OFF
END
- 8 - GAB/GAS-SH-e-0711
TARE
TARE
TARE
+
ZERO
MODE