CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
Step 9 Handrail & Pivot Trim Installation:
a) Insert Handrails (E, F) into Pedestals by slightly rotating Handrail and pushing front rubber lip of Handrail under
the Pedestal plastic.
b) Secure Handrails with bolts (g, 2 per side).
c) Install Pivot Trim Left & Right (G, H) onto Frame as shown in Fig. 9. Insert front tab of Pivot Trim into Motor
Cover side piece and then rotate down to cover pivot. Secure with Strap – Pedestal Trim (i) and two Screws 10-32
(j) using #2 Phillips screwdriver.
Truefitness.com / 800.426.6570 / 636.272.7100
24