Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
Step 6 Console Rack and Secure Pedestals:
a) Install Console Rack (A) onto Pedestals R & L by resting Console Rack tubing on top of Pedestal tubing cradles.
NOTE: Force may need to be applied to the inside of the pedestals (C, D). Spreading the pedestals apart helps
to ensure accurate console rack placement.
CAUTION: Do not pinch cabling during this step.
b) Install 2 screws (h) under each side of the console rack (A) but do not tighten.
c) Using 3/16 inch hex key, install, but do not tighten, eight Bolts 5/16-24 UNF x 1-1/2 (e) and external tooth
washers M8 (d) through Pedestal tubing nest and into Console Rack. You may need to align Pedestal and Console
Rack to install first bolt on right and left side.
d) Tighten 4 screws (h) from STEP 6b.
e) Tighten 8 bolts (f) from STEP 6c.
f) Tighten 2 bolts from STEP 2, Bolt 3/8-16 UNC x 3/4 (c) at pivot point of Pedestal.
g) Tighten 4 bolts from STEP 4, Bolt 3/8-16 UNC x 4-1/2 (b) at front of frame.
Step 4 Bolts
Pedestal Tubing Cradle
Truefitness.com / 800.426.6570 / 636.272.7100
Fig. 6
Step 2 Bolts
21
Hide quick links:
Advertisement
Table of Contents
