True Fitness ES900 Owner's Manual page 16

CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
Step 2 Pedestal Installation:
a) Place a section of cardboard onto right straddle cover as shown in Fig 2-1. Remove twist tie from cable bundle.
b) Install Pedestal – R (D) into Frame (B) rotated down as shown in Fig. 2. This position will help prevent cable
damage.
c) Using 7/32 inch hex key, install Bolt 3/8-16 UNC x 3/4 (c) and Washer 3/8 – Split (a) into pivot of Pedestal – R but
do not tighten yet.
d) Insert Pedestal – L (C) into Frame as shown in Fig. 2 with bolt (c) and washer (a) but do not tighten yet.
CAUTION:
Pedestals can pivot until secured in front. Do not grab top of pedestal.
Fig. 2
Truefitness.com / 800.426.6570 / 636.272.7100 12