REMOVE ALL THE PARTS OF YOUR YORK C520 FROM THE CARTON AND PLACE
THEM ON THE FLOOR CAREFULLY.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER
FOR YOU TO ASSEMBLE YOUR YORK C520 CYCLE.
ASSEMBLY INSTRUCTION
1.
A.
MOVING
WHEEL
NOTE: This equipment has been supplied with some Nylon Locknuts. It is essential that the
nuts are fully tightened onto the bolts, so that the bolt penetrates through the nylon insert.
B.
REAR
END
CAP
NOTE: Make sure you fasten the nuts and
bolts securely for your safety and
comfort when cycling.
*
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
GENERAL
FRONT
STABILIZER
REAR
STABILIZER
ATTACH THE FRONT STABILIZER
The front stabilizer has moving wheels near
each end.
Fix the front stabilizer to the main frame
and secure, using two carriage bolts,
washers, spring washers and nylon locknuts.
Fix the plastic caps onto the locknut heads.
#5552-06
#5552-07
#5552-08 #5552-09
ATTACH THE REAR STABILIZER
The rear stabilizer has end caps with an
adjustable knob fitted under neath that can
vary in height to enable you to level the cycle
on uneven floors.
Fix the rear stabilizer to the main frame and
secure, using two carriage bolts, washers,
spring washers and nylon locknuts.
Fix the plastic caps onto the locknut heads.
#5552-06
#5552-07
#5552-08 #5552-09 #5552-22
X2
X2
#5552-22
X2
X2
*
YORK C520 / 03