Attach The Handle Bar - York Fitness C520 Instruction Manual

4.
A.
FRONT
POST
B.
C.
CLAMP BRACKET
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.

ATTACH THE HANDLE BAR

HANDLEBAR
CLAMP
BRACKET
CLAMP
SPRING
BUTTERFLY
SCREW
KNOB
Open the handle bar clamp bracket with one hand,
with the other hand, fix the handle bar into the
clamp bracket carefully as shown.
NOTE: TAKE CARE NOTE: TAKE CARE to ensure the hand pulse
sensor wire does not get trapped when
you attach the handle bar.
Close the clamp bracket to hold the handle bar
in position.
NOTE: TAKE CARE NOTE: TAKE CARE to ensure the clamp spring
is located securely and aligned with the
hole on the clamp bracket.
Adjust the handle bar to the desired position
and fasten the butterfly screw knob with washer
to the clamp bracket as tight as you can.
NOTE: MAKE SURE you fasten the butterfly NOTE: MAKE SURE
screw knob securely for your safety
when cycling.
#5552-27
#5552-07
X1
X1
*
YORK C520 / 05