Operation Using Advanced Key Functions - Mazda 6 2011 Manual

Mazda6_8BG7-EC-10H_Edition1 Page87
Monday, August 2 2010 1:25 PM
Continuously pressing the push button
start while the engine is running and the
vehicle is stopped, or quickly pressing it
any number of times will turn the engine
off immediately.
Form No.8BG7-EC-10H
Advanced Keyless Entry and Start System
Operation Using Advanced
Key Functions
qKeyless Entry System
This system uses the more traditional
keyless entry buttons to remotely lock and
unlock the doors and opens the trunk lid.
It can also help you signal for attention.
Press the buttons slowly and carefully.
NOTE
The keyless entry system is designed to
l
operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
The system does not operate when the
l
auxiliary key is in the key slot.
The keyless entry system is fully operational
l
when the push button start is switched off.
The system does not operate if the push
button start is switched to any position
other than off.
All doors cannot be locked by pressing the
l
lock button while any door is open. The
hazard warning lights will also not flash.
If the transmitter does not operate when
l
pressing a button or the operational range
becomes too small, the battery may be
dead. To install a new battery, refer to
Maintenance (page 3-5).
Knowing Your Mazda
3-15