Mazda 6 2011 Manual page 338

Mazda6_8BG7-EC-10H_Edition1 Page338
Monday, August 2 2010 1:28 PM
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
7. Prompt: XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C) (The voice guidance reads
out the device tags registered to the
hands-free system.)
Press the talk button with a short press
during the read-out at the desired device,
and then say one of the following voice
commands to execute it.
Select phone : Selects device (Mobile
l
phone) when the talk button is short-
pressed.
Select music player : Selects device
l
(Music player) when the talk button is
short-pressed.
Edit : Edits device when the talk
l
button is short-pressed.
Continue : Continues the list read-
l
out.
Delete : Deletes the registered device
l
when the talk button is short-pressed.
Previous : Returns to the previous
l
device in read-out when the talk button
is short-pressed.
8. Prompt: End of list, would you like
to start from the beginning?
9. Say: [Beep] No
10. Prompt: Returning to main menu.
Device selection
If several devices have been programmed,
the Bluetooth unit links the device last
connected. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off.
6-114
Form No.8BG7-EC-10H
Hands-free phone
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Select phone
5. Prompt: Please say the name of the
device you would like to select.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which
device please?
6. Say: [Beep] XXXXX... (Ex. Device
B)
7. Prompt: XXXXX... (Ex. Device B).
Is this correct?
8. Say: [Beep] Yes or No
9. If Yes , go to Step 10. If No , the
procedure returns to Step 5.
10. Prompt: XXXXX... (Ex. Device B)
selected.