Mazda 6 2011 Manual page 337

Mazda6_8BG7-EC-10H_Edition1 Page337
Monday, August 2 2010 1:28 PM
Previous : Returns to the previous
l
phonebook data in read-out when the
talk button is short-pressed.
6. Prompt: End of list, would you like
to start from the beginning?
7. Say: [Beep] No
qDTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
Form No.8BG7-EC-10H
Bluetooth Hands-Free (Voice Recognition)
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to Bluetooth Hands-Free
Preparation (page 6-101).
Registered device read-out
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Pairing options
5. Prompt: Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
6. Say: [Beep] List
Interior Comfort
Hands-Free Setting
6-113