Mazda 6 2011 Manual page 284

Mazda6_8BG7-EC-10H_Edition1 Page284
Monday, August 2 2010 1:28 PM
Interior Comfort
Audio System
Category up
Press the category up button (
Category down
Press the category down button (
Every time the category up button (
pressed, the category is changed over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
Highest category → Lowest category →
XXX category
Category set (Category lock)
Press selection button 1 to lock the
category of the channel being received.
Press selection button 1 again to clear the
lock.
NOTE
A category can be set only when a channel
which belongs to a category is being received.
Channel selection within a category
To select a radio station in a set category,
turn the manual tuning dial.
NOTE
The channel number needs to be indicated
l
in the display to use the manual tuning dial
for this function.
To select a radio station other than one in a
l
set category, turn the manual tuning dial.
Scan tuning
Press the scan button (
automatically sample stations. Scanning
stops at each station for about five
seconds. To hold a station, press the scan
button ( ) again during this interval.
6-60
Form No.8BG7-EC-10H
NOTE
).
Unsubscribed channels, invalid channels,
l
parental lock channels and channel 0 are
).
not subject to the scan, therefore these
) is
channels will skip automatically.
If a category is set, scan channels in the
l
category. If a category is not set, scan all
channels.
Channel number, channel name,
category name, artist name, song titles
and information display
The information regarding the channel
which is currently being received is
displayed.
NOTE
If the entire title cannot be displayed, "..."
l
is added at the end to the part of the title
which can be displayed.
If a channel other than a parental-locked
l
channel is received, channel name,
category name, artist name, song title, and
information are displayed.
(Channel number display)
The channel number for the channel
currently being received is displayed.
(Channel name display)
The channel name for the channel
l
currently being received is displayed.
A channel name may have a full title
l
and an abbreviated title. In this case,
the full title is displayed. If the channel
only has an abbreviated title, it is
displayed.
If there is no channel name, No Ch
l
) to
Name is displayed.
(Category name display)
The category name for the channel
l
currently being received is displayed.