Mazda 6 2011 Manual page 106

Hide thumbs Also See for 6 2011:
Table of Contents

Advertisement

Mazda6_8BG7-EC-10H_Edition1 Page106
Monday, August 2 2010 1:26 PM
Knowing Your Mazda
Doors and Locks
Locking, unlocking with transmitter
(with retractable type key)
All doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-25).
Auto lock/unlock function
WARNING
Do not pull the inner handle on a front
door:
Pulling an inner handle on a front
door while the vehicle is moving is
dangerous. Passengers can fall out of
the vehicle if a front door accidentally
opens, which could result in death or
serious injury.
When the vehicle speed exceeds 20
l
km/h (12 mph), all doors lock
automatically.
When the ignition is switched off, all
l
doors unlock automatically.
These functions can also be disabled so
that they do not operate.
NOTE
Additional auto lock/unlock function
(Automatic transaxle)
A function setting is also available which
enable automatic locking and unlocking of
doors when shifting gears.
Auto lock/unlock function setting
change using door-lock switch
The doors and the liftgate can set to lock
or unlock automatically by selecting any
one of the functions from the following
table and using the driver's door-lock
switch on the interior to perform the
setting change as indicated in the
procedure which follows.
3-34
Form No.8BG7-EC-10H
Settings can be changed using the
following operation.
Function
Function
number
The auto door-lock function is
1
disabled.
All the doors and the liftgate lock
2
automatically when the vehicle speed
is about 20 km/h (12 mph) or more.
All the doors and the liftgate lock
automatically when the vehicle speed
is about 20 km/h (12 mph) or more.
3
All the doors and the liftgate unlock
when the ignition is switched from ON
to ACC or Off.
When the ignition is switched ON and
the shift lever is shifted from park (P)
4
to any other gear position, all the
doors and the liftgate lock
automatically.
When the ignition is switched ON and
the shift lever is shifted from park (P)
to any other gear position, all the
doors and the liftgate lock
5
automatically.
When the shift lever is shifted to park
(P) while the ignition is switched ON,
all the doors and the liftgate unlock
automatically.
1. Stop the vehicle and close all the doors.
2. Switch the ignition ON.
3. Press and hold the lock side of the
driver's door-lock switch within 10
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Referring to the auto lock/unlock
function setting table, determine the
function number for the desired setting
and press the unlock side of the driver's
door-lock switch only in the amount of
the selected function number (Ex. If
you select function 2, press the unlock
side of the switch only 2 times).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents