7.3 Maintenance
The boiler will only operate efficiently if the exchange
surfaces are kept clean.
The boiler must be cleaned as often as necessary and, like the
chimney, at least once a year or more in accordance with the
prevailing regulations and the insurance contract taken out.
7.3.1
Cleaning the flue gas circuit
7.3.2
Cleaning the combustion chamber
05/03/2013 - 300007650-001-02
The operations described below shall only be performed
with the boiler and power supply off.
- Unhook the front panel.
- Open the cleaning door (top door) by unscrewing the 4 closing nuts
(17 mm spanner).
- Remove the baffle plates.
- Carefully sweep the flue ways with the brush supplied for that
purpose.
- Also sweep the baffle plates and the front panel.
- If possible, use a vacuum cleaner.
- Replace the baffle plates.
- Close the door.
- Unscrew the 4 closing nuts and open the furnace door.
- Brush out the inside of the furnace.
- Use a vacuum cleaner to remove any soot which has accumulated
in the combustion chamber.
- Close the door and replace the front panel.
GT 330
7. Checking and maintenance
27