Using The Automatic Ttl Flash Mode - Bolt VX-760C User Manual

Using the Automatic TTL Flash Mode

When the VX-760C is mounted on a compatible camera, it can set the appropriate flash level automatically,
in conjunction with the camera's through-the-lens (TTL) metering system. To use the automatic flash mode,
mount the flash on the camera and follow these steps:
1. Turn the flash on and press the MODE button repeatedly to cycle through the flash modes until the TTL
mode indicator appears on the LCD.
2. Make sure your camera is set to a programmed or automatic mode, or on a priority mode such as
aperture priority.
3. Press the shutter-release button on your camera halfway
to ensure that the camera is communicating with the flash.
The camera's aperture settings will appear on the flash
LCD, and a flash icon will appear in the camera's viewfinder.
4. Press your camera's shutter-release button to take the
picture.
Using the Automatic TTL Flash Mode
Zoom
|
21