Using Flash Exposure Bracketing - Bolt VX-760C User Manual

Table of Contents

Press the SUB button repeatedly until the FEB icon blinks. Use

the left and right navigation buttons to adjust the FEB value, and

the up and down navigation buttons to fine-tune. Press the SUB

button again to confirm your selection.

Use the left and right navigation buttons to set the flash

exposure compensation, and the up and down navigation

buttons to fine-tune.

To turn off flash exposure

compensation, set the FEB

value to 0 and press the SUB

button to confirm your selection.

Note: The LCD will display 1b

after the first shot, and 2b after

the second shot. As always, the

flash exposure compensation will appear on the LCD before each shot. Flash exposure bracketing turns off

automatically after you fire three shots.

Important! Make sure your flash is recycled and ready before taking each shot.

Zoom

NOTE