Bolt VX-760C User Manual page 40

2. Press and hold the SUB button until the wireless flash mode icon and
the group and channel settings appear on the LCD.
3. Set the group by pressing the SUB button until the wireless flash
mode icon and the group setting blink. Use the left and right
navigation buttons to select ALL, AB, or ABC, and press the MODE
button to confirm your selection.
A. ALL fires all three groups at the same power level.
B. AB (A:B) sets the power level for groups A and B to fire at a ratio, e.g., 2:1 or 3:1. Group C is off.
C. ABC (A:B+C) sets the power level for groups A and B to fire at a ratio, as in option B. The power
level for group C will be flash compensation above or below the power level of group B.
Note: The ratios for A:B and A:B+C are controlled through
the camera's menu. To find out how to set the ratios, consult
your camera's instruction manual.
4. Set the channel by pressing the SUB button repeatedly until the
channel number blinks. Use the left and right navigation buttons
to cycle through channel numbers 1–4. When the desired channel
number appears on the LCD, press the MODE button to select it.
| |
40 40 Using Your VX-760C as a Wireless Master or Slave
2
Zoom
4
Zoom