Controlling Flash Coverage (Zoom) - Bolt VX-760C User Manual

Note: When decreasing the flash output in increments of one-third from one setting to a lower setting + 0.3
or 0.7, you will need to decrease it to the next lowest setting, and then fine-tune it up. For example, when
decreasing from 1/4 to 1/8 + 0.7, you will need to decrease to 1/8, and then increase to 1/8 + 0.7.
When setting exposure settings on your camera, the highest shutter speed available will be your camera's
flash sync speed.
Tip: For best results, use a handheld light meter when shooting in manual flash mode

Controlling Flash Coverage (Zoom)

The VX-760C's angle of coverage can be adjusted, or zoomed, to match the focal length of your lens, so that
your image is evenly illuminated from edge to edge.
Controlling Flash Coverage (Zoom)
| |
27 27