Table of Contents
Advertisement
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.
Important!
Make sure that the slave mode switch is set to Off when the flash is mounted on your camera. Only switch it
to the "S" position when using the flash off-camera as a wireless slave.
Using the Automatic TTL Flash Mode
When the VS-510S is mounted on a compatible camera, it can set the appropriate flash level automatically, in
conjunction with the camera's through-the-lens (TTL) metering system. To use the automatic mode, mount the
flash on the camera and follow these steps:
|
Using the Automatic TTL Flash Mode
17
Advertisement
Table of Contents
