Table of Contents
Advertisement
Using the Automatic TTL Flash Mode
When the VS-510P is mounted on a compatible camera, it can set the appropriate flash level automatically, in
conjunction with the camera's through-the-lens (TTL) metering system. To use the automatic mode, mount the
flash on the camera and follow these steps:
1.
When you turn the flash on, it will be in automatic mode. This will be confirmed by the TTL mode indicator
on the LCD. If the flash has been set to another mode, press the Mode button repeatedly to cycle through
the flash modes until "TTL" is shown on the LCD.
2.
Make sure your camera is set on a programmed or automatic mode, or on a priority mode such as
aperture-priority.
3.
Select the appropriate curtain-sync mode (see "Using Rear- or Second-Curtain Synchronization" on page
29).
4.
Press the shutter-release button on your camera halfway to ensure that the camera is communicating
with the flash. The camera's ISO and aperture settings will be displayed on the flash LCD, and a flash icon
will appear in the camera's viewfinder.
|
18
Using the Automatic TTL Flash Mode
Advertisement
Table of Contents
