Final Adjustements; Push Button Label; Close The Door Panel; Installation - golmar SV-372S Colour Instruction Manual

6
P
ush button label.
To customize the push button label, insert a flat screwdriver to accede to the label, remove
the push button front cover, see picture A & B . The label is now accesible to mark a text,
see picture C .
Replace the push button front cover, making a light pressure until listenning a click in both
sides of the front cover, see picture D .
A
C
lose the door panel.
Finish the door panel assembly by
replacing the aluminium front.
With help of an screwdriver,
aluminium front with especified
screws, as shown on the picture.
DOOR PANEL INSTALLATION
If after starting the system it's considered that the
audio volume isn't correct, proceed with the
necessary adjustments as shown on the picture.
B
fix the
F
D
C
Text
Text
inal adjustments.
Text