Monitor Installation - golmar SV-372S Colour Instruction Manual

10
R
emove the bracket installation.
+
BUS
BUS
+
BUS
BUS
F
ix the bracket installation to the wall.
Avoid to place the monitor near to heating sources,
in dusty locations or smoky environments.
The bracket can be fixed using an electrical emmbeding
box or directly on the wall. To install directly over the
wall, drill two holes of
screws.
The upper part of the bracket must be placed at 1,60m.
height roughly. The minimum distance between the
monitor and the closest object must be 5cm.

MONITOR INSTALLATION

Unscrew the monitor bottom screws.
Remove the bracket installation of the monitor.
6mm. and use the supplied