Aastra 6739i User Manual page 148

Handling Calls
Transferring Two Existing Calls
The 6739i allows you to perform a transfer of a call when there are currently two active calls on the phone. For example,
on your phone, there are two calls - Call on L1 and Call on L2. L1 is on hold. L2 has an active call in focus. You can perform
the following to transfer L2 to L1.
1. Press the Key or the
2. Press the "Lines" key. The Line keys display on the screen.
3. Press L1 where the call is on hold.
L2 is transferred to L1.
Completing a Transfer to a Contact in Phone Directory
Users can complete a blind transfer to a contact in their local directory. If a user is in a call and initiates a transfer, they can
navigate to the Directory screen where a new transfer key can be pressed to complete a blind transfer. There is no
change to start a consultative call.
When a directory entry is shown, a Transfer key can be pressed to trigger a blind transfer. The Transfer softkey has been
added to the contact card in the directory and will only appear if a transfer has been initiated. From this screen, by press-
ing Dial you can do a consultative transfer and by pressing Transfer you can complete a blind transfer.
Note:
The line softkey is greyed out.
To Transfer a Call to a Contact in the Phone Directory:
Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
1.
2.
Press the Key or the
3. Press the Directory key and select a contact.
4. To complete a blind transfer, press the Transfer Key again before the receiving end answers.
To complete a consultative transfer, press Dial to call the contact. Remain on the line to speak with Party
2 before pressing the Transfer key again to transfer Party 1 to Party 2.
To cancel the transfer, select Cancel on the display screen or press
142
.
Transfer
Directory
John Doe
9055552233
Office 1
9055551122
Home 2
9055559999
Cell 3
. You should hear a dial tone as a second line opens up.
Transfer
Mon Sep 1
12 : 45pm
Dial Cancel
Lines Transfer
.
41-001317-05 REV01 – 06.2013