Lock - Aastra 6739i User Manual

Lock

You can lock a phone to prevent it from being used or configured. Once the phone is locked, you must enter your pass-
word to unlock the phone.
• You can lock/unlock a phone using any of the following methods:
• Using the IP Phone UI at the path Options->Lock.
• Using the Aastra Web UI at the path Operation->Phone Lock.
• Configuring a "Lock" softkey and then pressing the softkey to lock and unlock the phone. For more information on this
method, see "Phone Lock Softkey"
Note:
All of the methods above configure locking/unlocking of the phone dynamically. Once configured, the feature takes
affect immediately.
Locking/Unlocking the Phone Using the IP Phone UI
Use the following IP Phone UI procedure to lock/unlock an IP phone and prevent it from being used or configured.
IP Phone UI
Lock the Phone
1. Press on the phone to enter the Options List.
2. Press Lock.
The prompt, "Lock the phone?" displays.
3. Press Yes to lock the phone.
The phone locks.
Unlock the Phone
1. Press the Options key on the phone to enter the Options List.
A "Phone is Locked" screen displays allowing you to press an "Unlock the Phone" key.
2. Press Unlock the Phone.
A prompt, "Enter Unlock Password" displays as well as a keyboard.
3. Enter the user password and press Enter. Default is blank.
A prompt "Unlock the Phone?" displays.
4. Press Yes to unlock the phone.
The phone unlocks.
41-001317-05 REV01 – 06.2013
on page 117.
Options Key
131