Troubleshooting; Technical Spezifications - VDO X1DW Instruction Manual

GB SLO PL JP

7. Troubleshooting

Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause
Half segments on the display Computer software not running
(e.g. after a battery change) correctly after battery change
No speed display Distance from sensor to
magnet too big
No speed display Computer not properly clicked
in the handlebar holder
No speed display Wheel circumference is not
correctly set or is at zero
Display becomes weak Battery dead
Display becomes weak Temperatures under 5° make
the display sluggish
20 X1DW

8. Technical spezifications

Computer
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Correction Handlebar holder:
weight: approx. 15 g
Take out battery and insert Transmitter:
again weight approx. 20 g
Computer battery:
Correct position of sensor 3V, type 2032
and magnet Transmitter battery:
3V, type 2032
Place computer head in the Computer battery life-span:
handlebar holder, twist until 600 cycling hours, approx. 12,000 km (7400 m)
it clicks Transmitter battery life-span:
1000 cycling hours (approx. 20,000 km (12,000 m)
Set wheel circumference Working temperature of the display:
-15 °C to +60 °C
Check battery, replace if nec.
At normal temperatures the
display will work normally
again
VDO CYCLECOMPUTING www.vdocyclecomputing.com
:
JP PL SLO
Speed range:
for wheel size 2155 mm, min 2.5 km/h, max 199.5 km/h
Ride time measurement range:
up to 23:59:59 HH:MM:SS
Day's trip counter measurement range:
up to 999.99 km or mi
Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi
Wheel circumference setting range:
from 100 mm to 3999 mm (3.9 to 157.4 inches)
X1DW
GB
21