VDO X1DW Instruction Manual page 154

GB SLO PL JP
1. Display
The display can be divided
into 5 sections:
Section 1
always shows
the current time.
Section 2
shows the current cadence,
if the cadence transmitter is
installed (optional).
You will also find
indicator elements
on the display.
You can find the description of
the individual indicators on
the right hand side.
4 X1DW
Service indicator
shows that your bike should go for a service.
You can set the service interval individually for
bike 1 and bike 2.
Section 3
shows the Indicator bike 1/bike 2
current speed. The computer can work with two different set-
tings for 2 bikes. The indicator shows which of the
two bikes you have chosen to use.
Section 4 The total distances are accordingly counted and
shows the value of the stored separately for bike 1 and bike 2.
display function/
information that you
selected. The computer can display both KHM and MPH.
Distances are shown in kilometres or miles
Section 5 accordingly.The indicator shows the selected
shows the description of measurement unit.
the selected function in
the top line (info line). The
second line (menu line)
shows,
whether there is more
B
information „MORE"
whether there is
B
another selection
option „SELECT"
VDO CYCLECOMPUTING www.vdocyclecomputing.com
to speed (average)
The computer compares the current speed
with the average speed.
The indicator shows:
B
B
B
Measurement unit (KMH or MPH) When a submenu has been accessed, these indi-
cators flash and show that there are other selec-
tion options or that the computer is waiting for
an entry (setting mode).
JP PL SLO
Speed difference indicator (current)
whether the current speed is higher than
the average (+1 KMH)
below the average (-1 KMH)
or matches the average
(tolerance +/- 1 KMH).
Menu prompt indicator
X1DW
GB
5