Table of Contents
Advertisement
13 - MAINTENANCE AND CLEANING
CLEAN THE EXCHANGER AND THE COMPARTMENT BENEATH THE BRAZIER EVERY 2/3 DAYS
Cleaning the exchanger and the compartment beneath the brazier is a simple operation but very important if the boiler is to maintain
optimal performance.
We therefore recommend cleaning the internal exchanger every 2-3 days, performing these simple operations in sequence:
Activate the "CLEANING" function - with the boiler off press - menu, select "Settings", with the arrows <> select "Cleaning",
•
confirm with the "Menu" key, activate the cleaning "ON" with the + - keys. This procedure starts the smoke extractor on the
maximum setting to expel the soot that becomes dislodged when the exchanger is cleaned.
Clean the pipe unit - Using the hook provided, shake the rods located beneath the cover "B" firmly 5-6 times. This should remove
•
the soot that has deposited on the smoke ducts of the exchanger during normal use of the boiler (fig. 1).
Deactivate the "CLEANING" function - this function is deactivated automatically after two minutes. If you need to stop the
•
function sooner, press the "Esc" key.
Clean the smoke conveyor compartment (fig.2) - The boiler is equipped with a removable ash tray "H" which collects any
•
accumulations of soot and ash.
•
When done cleaning, close the cover and ash tray.
If the cleaning is not done every 2-3 days, the boiler could go into alarm caused by ash clogging after several hours
of operation.
Figure 1
Technical Dept. - All rights reserved - Reproduction is prohibited
B
Figure 2
V
H
67
Hide quick links:
Advertisement
Table of Contents
