Table of Contents
Advertisement
10 - MENU ITEMS AND FUNCTION
START-UP
Press key 1 (esc) to start up the appliance. The display will show ON with the flashing flame symbol. When the flame stops blinking, the
boiler has reached the operating condition for "supplying power".
The default target room temperature is set at 20°C. To change this setting, follow the instructions in the adjustments menu; do the same
to set the heating water temperature and the speed of the ventilation fan. To activate an external thermostat, if present, see the dedicated
paragraph.
POWER SUPPLY
When start-up is complete, the panel with show ON with a constant flame at level 3
. The modulation of the flame for higher or lower
power is then controlled autonomously on the basis of the temperatures set in the "System configuration."
60
Hide quick links:
Advertisement
Table of Contents
