RED COMPACT SLIM 15 Installation Manual page 37

7 - HYDRAULIC CONNECTION
HYDRAULIC KIT ATTACHABLE TO THE SIDE OF THE BOILER (OPTIONAL KIT)
It is also possible to connect the hydraulics to the side of the boiler. To do this, you must:
• remove the plate "K" from the right side of the boiler by removing the five screws "g" (fig. 1)
• acquire the optional hydraulic kit "V" (fig. 2)
• remove the outlet tap "r" (fig. 2)
• attach the optional kit with the three screws "n" (fig. 3)
• connect the tubes to the existing kit (fig. 4)
• screw the outlet tap "r" to the new kit (fig. 4)
V
r
Technical Dept. - All rights reserved - Reproduction is prohibited
g
K
FIGURE 1
s
T
FIGURE 2
35