Replacing The Touch Pad; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the touch pad

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Using the alignment posts on the palm-rest assembly, place the touch pad
on the palm-rest assembly.
2
Align the screw holes on the touch-pad bracket with the screw holes on the
palm-rest assembly and snap the touch-pad bracket into place.
3 Replace the screws that secure the touch-pad bracket to the palm-rest
assembly.
4 Adhere the touch-pad cable to the touch pad.
5 Slide the touch-pad cable and touch-pad buttons cable into the touch pad
and press down on the latches to secure the cables.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2 Replace the solid-state
3 Replace the memory
4 Replace the base
48
Before working inside your
drives.
modules.
panel.
computer. For more safety best
computer.
palm rest".