Replacing The Display Bezel; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the display bezel

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Follow the procedure from step 1 to step 2 in "Replacing the
2 Connect the logo-board cable to the logo board and secure it with the
adhesive tape.
3 Slide the display-board cables into the logo board and press down on the
latches to secure the cables.
4 Carefully turn the display bezel over.
5 Align the display bezel with the display back-cover and gently snap the
display bezel into place.

Post-requisites

1
Replace the display
2 Replace the hinge
3
Follow the procedure from step 5 to step 11 in "Replacing the
4 Replace the wireless
5
Replace the solid-state
6 Replace the memory
7
Replace the base
Before working inside your
assembly.
covers.
card.
drives.
modules.
panel.
computer. For more safety best
computer.
logo board".
palm rest".
87