Replacing the hinge covers
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in
After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the hinge covers with the screw holes on the
computer base and snap the hinge covers into place.
2
Replace the screws that secure the hinge covers to the computer base.
Post-requisites
1
Follow the procedure from step 5 to step 11 in "Replacing the
2
Replace the
solid-state
3
Replace the
memory
4
Replace the
base
76
Before working inside your
drives.
modules.
panel.
computer. For more safety best
computer.
palm
rest".