Replacing The Touch Pad; Procedure; Post-Requisites - Dell P76G001 Service Manual

Replacing the touch pad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide and replace the touch pad into its slot on the palm-rest assembly.
2 Align the screw holes on the touch-pad board with the screw holes on the palm-
rest assembly.
3 Replace the six screws (M2x3) that secure the touch-pad board to the palm-
rest assembly.
4 Slide the touch-pad bracket at an angle and align the screw hole on the touch-
pad bracket with the screw hole on the palm-rest assembly.
5 Replace the screw (M2x3) that secures the touch-pad bracket to the palm-rest
assembly.
6 Adhere the tapes that secure the touch-pad board to the palm-rest assembly
and cover the tapes with the transparent film.
7 Connect the touch-pad cable to its connector and close the latch.

Post-requisites

1 Replace the speakers.
2 Replace the system
3 Replace the display
4 Replace the I/O
5 Replace the hard
6 Replace the wireless
7 Replace the memory
8 Replace the base
92
computer. After working inside your computer, follow
After working inside your
board.
assembly.
board.
drive.
card.
module.
cover.
computer. For more safety best
www.dell.com/
Before