Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Alienware 15 Service Manual

Removing the power-
adapter port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove the
3
Remove the
4 Remove the
5
Follow the procedure from step 1 to step 11 in "Removing the
6 Remove the
7
Remove the
8 Remove the
9
Follow the procedure from step 1 to step 10 in "Removing the
board".

Procedure

1
Remove the screws that secure the power-adapter port bracket to the
computer base.
2
Lift the power-adapter port bracket off the power-adapter port.
3 Note the power-adapter port cable routing and remove the cable from the
routing guides on the computer base.
126
Before working inside your
base panel.
memory modules.
solid-state drives.
wireless card.
hinge covers.
I/O board.
display assembly.
computer. For more safety best
computer.
palm rest".
system