Replacing The Alienware Alienhead Led Board; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Adhere the Alienware AlienHead LED board to the display back-cover.
2 Route the Alienware AlienHead LED cable on the display back-cover and
adhere it to the display back-cover.
3 Adhere the tape that secures the Alienware AlienHead LED board to the
display back-cover.

Post-requisites

1 Follow the procedure from step 4 to step 5 in "Replacing the
cover".
2 Replace the display
3
Follow the procedure from step 2 to step 5 in "Replacing the
4 Replace the display
5
Replace the hinge
6 Follow the procedure from step 5 to step 11 in "Replacing the
7
Replace the wireless
8 Replace the solid-state
9
Replace the memory
10 Replace the base
106
Before working inside your
panel.
assembly.
covers.
card.
drives.
modules.
panel.
computer. For more safety best
computer.
display back-
display bezel".
palm rest".