Replacing The Alienware Alienhead Led Board; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Adhere the Alienware AlienHead LED board to the display back-cover.
2 Route the Alienware AlienHead LED cable on the display back-cover and
adhere it to the display back-cover.
3 Adhere the tape that secures the Alienware AlienHead LED board to the
display back-cover.

Post-requisites

1 Follow the procedure from step 4 to step 5 in "Replacing the
back-cover".
2 Replace the display
3 Follow the procedure from step 2 to step 5 in "Replacing the
bezel".
4 Replace the display
5 Replace the hinge
6 Follow the procedure from step 5 to step 11 in "Replacing the
7 Replace the wireless
8 Replace the solid-state
9 Replace the memory
10 Replace the base
106
computer. After working inside your
panel.
assembly.
covers.
card.
drives.
modules.
panel.
After working inside your
display
display
palm rest".