Replacing The Alienware Alienhead Led Board; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Connect the camera cable to the camera module.
2 Adhere the Alienware AlienHead LED board and display-board cable to
the display back-cover.
3 Adhere the mylar to secure the Alienware AlienHead LED board and
display-board cable and to the display back-cover.
4 Adhere the mylar to secure the display-board cables and the display-
panel AlienFX LEDs to the display back-cover.

Post-requisites

1 Replace the display
2 Replace the display
3 Replace the display
4 Follow the procedure from step 5 to step 11 in "Replacing the
5 Replace the wireless
6 Replace the base
130
Computer. After working inside your
panel.
bezel.
assembly.
card.
panel.
After Working Inside Your
palm rest".