Removing The Led Board; Replacing The Led Board; Removing The Fan Assembly - Dell Inspiron 8000 Manual

Hide thumbs Also See for Inspiron 8000:

Table of Contents

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.

Removing the LED Board

1. Follow the instructions in

"Preparing to Work Inside the

2. Remove the

hinge

cover.

3. Remove the two M2 x 4-mm screws.

4. Pull the LED board away from its connector.

1. Align the two screw holes with the two mounting holes on the bottom case assembly, and press the board into its connector.

2. Replace the two M2 x 4-mm screws.

Fan Assembly

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.

1. Follow the instructions in

"Preparing to Work Inside the

2. Remove the

system

board.

Computer."

Table of Contents