MOTO GUZZI California Vintage Use And Maintenance Book page 49

Brakes
RH front brake
Stainless steel semi-floating with differentiated 4 piston
calipers, fixed type. Lever control positioned on the
RH side of the handlebar.
Hydraulic transmission independent from rear brake;
ø disk = 320 mm.
ø braking cylinder = 30/34 mm.
ø master cylinder = 13 mm.
LH front and rear brakes
Integral braking system with metering/control valve.
Stainless steel semi-floating with differentiated 4 piston
calipers, fixed type.
Fixed disk with 2-piston floating calliper. Pedal lever
control in the centre on the RH side of the vehicle.
ø front disk = 320 mm.
ø rear disk = 282 mm.
ø braking cylinder = 30/32 mm.
ø master cylinder = 16 mm.
Rear brake is connected to front left brake through
hydraulic transmission. Each single components of
the front left brake has the same dimensions of those
in the manual front right brake.
Dimensions and weight
Wheelbase (loaded) .................................... mm 1560
Maximum length .......................................... mm 2380
Maximum width ............................................. mm 850
Minimum ground clearance .......................... mm 170
Maximum height (with windscreen) ............ mm 1430
Rider's seat height ........................................ mm 770
Weight (unloaded) ........................................... kg 269
The motorcycle equipped with wind screen,
bags and foot guards ensure higher riding
comfort but limit vehicle aerodynamic features.
For this reason, it is recommended the max. riding
speed of 130 km/h be never exceeded, especially
when riding under max. load conditions.
49