CHAPTER 6 TRANSMISSION
32. Mount the shift shaft D.
!Fig 75(page 15).
Fig 75
33. Mount the shift cam E, then mount
the limit pole B and the spring G
as an assembly. !Fig 76(page 15)
Fig 76
34. Assemble the O-ring C on the shift
shaft.!Fig 77(page 15).
Fig 77
35. Grease the shift housing.
!Fig 78(page 15).
Fig 78
36. Apply Loctite 510 sealant evenly on
the fringe of shift housing cover
A, then, Assemble the shift housing
cover A. !Fig 79(page 15).
Fig 79
37. Mount the lubricating oil duct U with
two O-rings V, then, tighten the screw M6
(L12) W to a torque of 20Nm.
!Fig 80(page 15).
CHAPTER 6
LH800U-2D SERVICE MANUAL
TRANSMISSION. 6- 17